ACRYLIC
CRYSTAL CLEAR PIPES & RODS

Acrylic Pipes (Extruded) - From 6x10mm ID/OD To 50x60mm ID/OD
                                            Length up to 2 meters or any other specified sizes in bulk quantity.

Acrylic Pipes (Cylinder) - From 70mm to 310mm OD in 3 mm - 4 mm & 5 mm wall thickness.                                            In length up to 600mm. or any other specified sizes in bulk Quantity.

Acrylic Rods: - From 5 mm to 25 mm OD in length 1 meter.
                          Or any other specified sizes in bulk quantity.

Polycarbonate Pipes - From 17x25 ID/OD to 61x64 ID/OD in 1 meter length.

Polycarbonate Lathies - In 1 meter length  (Approved by DRDO office - Delhi for Defence                                         Ministry & Police Departments)

Application Acrylic Pipes - Chemicals, Flour Mills, Textiles, Electricals, Interior Decoration &                                              other Commercial use. for Dental Equipment, Engineering craft                                              Articles,Screen Printing, Packing & Advertising.

Application Poycarbonate Pipes - Sodamaker, Inducdion Furnace, Lathi


PROPERTIES

SALIENT FEATURES

- Chemical Resistant
- Crystal Clear Available In Range Of Sizes.
- UV Stabilized Available In 2 Meter.
- Tough And Impact Resistant Standard Length

PROPERTIES

Acrylic pipes are the outcome of the acrylic pellets with following specifications

Properties                                   

Method

 

Specific Gravity

ASTM. D 792

1.19

OPTICAL
Total Light Transmittance
Refractive Index nD

ASTM. D 1003
ASTM. D 542

93
1.49

THERMAL
Heat Distortion temp.

ASTM. D 648

100

MECHANICAL

-          Tensile Strength
-          Elengation at Rupture
-          Moules Of Elasticity
-          Compressive Strength Of Yield
-         Impact Strength
-         Rockwell Strength

ASTM. D 638
ASTM. D 638
ASTM. D
ASTM. D  695
ASTM. D 256
ASTM. D 782

730
3
3 x 10
4
1100
ft. 1b / kg.cm / cm 0.3
M 1002

ELECTRICAL
-          Volume Resistivity

ASTM. D 257

>1015

MISELLANEOUS
Water Absorption
Inflammablity

ASTM. D 570
ASTM. D 635

0.3
26

CHEMICAL RESISTANCE AT 200 C (680F)

Chemicals                      

Concentration

Acetic acid 10%
Alluminium Potassium Sulphate
Ammonia
Amyl Acetate
Aniline
Anthracene
Calcium Chloride
Chromic Acid
Citric Acid Saturated
Petroleum Ether (100-1200 C)
Ethylene Glycol
Ethylene Oxide
Ferric Chloride
Formaldehyde
Formic Acid
Glycerol
Hexane
Hydrochloric Acid
Hydrogen Peroxide
Lactic Acid
Lanoline
Magnesium Chloride
Mercury
Metol Quinone
Methyamine
Nitric Acid
Oild: Diesel, Olive Transformer
Oxalic Acid
Paraffin
Paraffiin, Medicinal
Phosphoric Acid
Piperdine
Potassium Chlorate
Potassium Dichromate
Potassium Hydroxide
Potassium Permanganate
Polyproplene Ldipate
Polyproplene Laurate
Polyproplenesebacate
Sebacic acid
Sodium Carbonate
Sodium Chlorate
Sodium Hydroxide
Sodium Hypochlorite
Sodium Thiosulphate
Steric acid
Sulphuric Acid
Tartaric Acid
Turpentine
Water
White Spirit


Saturated Solution
0.88 SG Solution


Solution In Paraffin
Saturated Solution
10%




Dry
40% aq
10%


10% Concentrated
10 vols






10%




10%

Saturated Solution
10%
Saturated Solution
0.1 N Solution




Saturated Solution
Saturated Solution
Saturated Solution
(10% chlorine)
40%

10% 30%
Saturated